Concrete driveways in St George
Updated October 2026
A new concrete driveway is one of the most practical upgrades you can make to a St George home. It lifts street appeal, handles daily traffic for decades and suits everything from a flat block in Mortdale to a steep run down toward the river in Oatley. We connect you with experienced, insured local concreters who quote and do the work. We are a referral service, not a concreting business, so you get matched with a contractor suited to your job.
What a concrete driveway costs in St George
Guide pricing only. Every site is different. Across Australia in 2026, plain broom-finish concrete typically runs about $75 to $150 per square metre laid, with exposed aggregate around $120 to $220 and coloured concrete around $95 to $200. Sydney sits at the upper end of those ranges. For a typical 60 square metre Sydney driveway, published estimates run roughly $5,400 to $13,200 fully installed, and a council vehicle crossing can add more on top. Removing an old driveway first usually adds around $30 to $100 per square metre.
The only way to get a real number for your block is a site visit and a written quote. Get a fast quote and we will connect you with local contractors.
How a driveway pour works
Most residential driveways in St George follow the same sequence.
1. Excavation and removal of the old surface or lawn
2. A compacted road base sub-base
3. Formwork to set the shape, falls and edges
4. Steel mesh reinforcement, usually SL72 or heavier for driveways
5. The pour, screeding and finishing
6. Curing, then saw-cut or tooled control joints
7. Sealing, especially for coloured and exposed aggregate finishes
Keep cars off a new driveway for about seven days. Concrete keeps gaining strength for around 28 days.
Finish options for St George driveways
Plain grey with a broom finish is the budget workhorse. Coloured concrete adds through-colour oxide for charcoal, sandstone and limestone tones that suit new duplexes as well as older brick homes. Exposed aggregate shows decorative stone and gives extra grip on sloped driveways. Stencilled and stamped finishes are also available from some contractors.
Council approval and the crossover
The driveway on your own land generally does not need approval when it meets exempt development rules, but the section between your boundary and the kerb is council land. Most St George streets fall under Georges River Council or Bayside Council, and a crossover approval is usually needed for that strip, built to the council's specification. A good local concreter will walk you through it.
Licensing and insurance
In NSW, residential building work worth more than $5,000 (labour and materials, including GST) must be done by a licensed contractor. Most full driveway replacements are over that threshold. Our referral service connects you with experienced, insured contractors. Always ask for the contractor's licence number and check it on the NSW Government licence check before you sign.
Site factors that move the price
- Slope. Steep blocks in Oatley, Lugarno and Connells Point often need a concrete pump because the truck cannot reach the pour. Pump hire adds to the quote.
- Access. Narrow frontages, battle-axe blocks and tight streets in Kogarah, Carlton and Arncliffe slow the job down.
- Demolition. Breaking out and tipping an old concrete driveway is a real cost line.
- Coastal exposure. Salt air at Brighton-Le-Sands and Sans Souci favours a sealed finish and quality mix design.
- Soil. Sandy ground near Botany Bay needs thorough compaction so the base does not settle.
- Size and shape. Long straight runs price better per square metre than small cut-up areas.
Duplex rebuilds across Hurstville, South Hurstville and Beverly Hills mean plenty of new shared driveways are going in, so local contractors know the crossover requirements well.
Weather and timing
Concrete pours best in mild, dry conditions. Summer heat makes the surface set fast and can stress the finish, so contractors often pour early in the morning. Rain within the first day can damage the surface, which is why pour dates sometimes move at short notice. A contractor who delays for weather is protecting your job.
How long a concrete driveway lasts
A properly built and jointed concrete driveway commonly lasts 25 to 40 years or more. Resealing decorative finishes every few years keeps colour and stone looking fresh. If your existing driveway is cracked or sunken, see our concrete repairs page before committing to a full replacement.
Ready to compare prices from local concreters? Get a fast quote.
Frequently asked questions
How long before I can drive on a new driveway?
Most contractors ask you to stay off it with vehicles for about seven days. Foot traffic is usually fine after 24 to 48 hours. Heavy vehicles should wait longer.
Do I need council approval for a new driveway?
Often not for the section on your own land, but the kerb-to-boundary crossover usually needs approval from your council. Across St George that is mostly Georges River Council or Bayside Council, depending on your street.
What thickness should a residential driveway be?
Around 100mm with steel mesh is typical for cars. Driveways carrying trailers, boats or heavier vehicles are often poured at 125mm to 150mm. Your contractor will confirm after seeing the site and soil.
Is exposed aggregate worth the extra cost on a sloped driveway?
Many homeowners on the river slopes think so. The textured stone surface gives better grip in the wet than a steel-trowelled finish, which matters on steep blocks in suburbs like Oatley and Lugarno.